Sheetmetal fabricators are confronted with so many different types of sheet every day that no well-organized business should be without a multiple decoiling line.



Our objectives in developing this line were:



rapid sheet change-over
simple operation
retrofitting
lower acquisition costs
one-person operation
space-saving
Sheetmetal fabricators are confronted with so many different types of sheet every day that no well-organized business should be without a multiple decoiling line.



Our objectives in developing this line were:



rapid sheet change-over
simple operation
retrofitting
lower acquisition costs
one-person operation
space-saving
The efficient production of blanks requires keeping a wide range of entirely different coils on hand. To allow rapid access to different sheets, we developed a multiple decoiling system featuring automatic sheet change-over in less than 1 minute.



Our objectives in developing this line were:



fully automatic sheet change-over in the shortest possible time
manual upper straightening shafts adjustment
manual adjustment of slitting knives
the simplest possible operating
retrofitting
lower acquisition costs
one-worker operation
space savings



The Forstner fully-automatic decoiling, slitting and cut to length line offers features that an industrial production manager has only dreamed about. This line fulfills the demanding requirements of any sheet metal working industry.



Two to max six powered, cantilever, manually expandable decoilers provide all advantages for efficient loading by fork lift, crane or scissor coil car and decoil or recoil your coils smoothly.

The sheet metal guide-lanes facilitate feeding the sheet into the powered coil selector and prevent damage to the surface of the coils. The guideways are non-powered but guarantee the recoiling of your valuable material.

The coil change-over from one material to another is a fully automatic function of the coil selector and can easily be done by one operator. Changing from one coil width to the other is also an automatic process with the help of the powered edge-guide MFA.

Whenever a new coil is selected, the upper straightening shafts must be adjusted manually into a new position to ensure the straightening quality. The coil-set is eliminated. Marks or lines from the upper straightening shafts can only be prevented by opening the upper straightening shafts during the standstill using the optional programmable straightener with sensitive material mode. We propose the programmable straightener when you are going to process sensitive material for high-quality and visible end products.

The heart of this line is the slitter with manual knife adjustment and scrap prevention. All assembled knives are positioned in a short time efficiently and the upper knives are deactivated for cutting to length only or for scrap prevention.

Fast, burr less and precise cuts from the electric guillotine shear are achieved throughout the long life-time of this line.

The control makes the operation of the line a pleasure. The advanced control SPS-F2 version is outstanding not only for reliability, flexibility and precision but especially for ease of operation and unbeatable results. You can see easy understandable and logic symbols instead of text on the touch panel. An external programming can optionally be realized as well. More options for example remote control for decoilers and coil car, remote maintenance are often used by the industry.
The efficient production of blanks requires keeping a wide range of entirely different coils on hand. To allow rapid access to different sheets, we developed a multiple decoiling system featuring automatic sheet change-over in less than 1 minute.



Our objectives in developing this line were:



fully automatic sheet change-over in the shortest possible time
programmable upper straightening shafts adjustment
manual adjustment of slitting knives
the simplest possible operating
retrofitting
lower acquisition costs
one-worker operation
space savings



The Forstner fully-automatic decoiling, slitting and cut to length line offers features that an industrial production manager has only dreamed about. This line fulfils the demanding requirements of any sheet metal working industry.



Two to maximum six powered, drop in, manually expandable decoilers provide all advantages for efficient loading by fork lift or crane and decoil or recoil your coils smoothly. The upper mandrels are in a stackable frame to lift up and down by a fork lift and the lower mandrels are in a movable frame to pull out loadable by crane or fork lift.

The sheet metal guide-lanes facilitate feeding the sheet into the powered coil selector and prevent damage to the surface of the coils. The guideways are non-powered but guarantee the recoiling of your valuable material.

The coil change-over from one material to another is a fully automatic function of the coil selector and can easily be done by one operator. Changing from one coil width to the other is also an automatic process with the help of the powered edge-guide MFA.

Whenever a new coil is selected, the upper straightening shafts are automatically adjusted into a new position to ensure the required straightening quality. The coil-set is eliminated. Marks or lines from the upper straightening shafts can only be prevented by opening the upper straightening shafts during the standstill using the programmable straightener with sensitive material mode. We propose the programmable straightener when you are going to process sensitive material for high-quality and visible end products.

The heart of this line is the slitter with manual knife adjustment and scrap prevention. All assembled knives are positioned in a short time efficiently and the upper knives are deactivated for cutting to length only or for scrap prevention.

A folding table between the slitter and the guillotine shear can be lowered to enter the line for easily setting the slitting knives.

Fast, burr less and precise cuts from the electric guillotine shear are achieved throughout the long life-time of this line.

The control makes the operation of the line a pleasure. The advanced control SPS-F2 version is outstanding not only for reliability, flexibility and precision but especially for ease of operation and unbeatable results. You can see easy understandable and logic symbols instead of text on the touch panel. An external programming can optionally be realized as well. More options for example remote control for decoilers and coil car, remote maintenance are often used by the industry.
The efficient production of blanks requires keeping a wide range of entirely different coils on hand. To allow rapid access to different sheets, we developed a multiple decoiling system featuring automatic sheet change-over in less than 1 minute.



Our objectives in developing this line were:



fully automatic sheet change-over in the shortest possible time
programmable upper straightening shafts adjustment
programmable setting of slitting knives
the simplest possible operating
retrofitting
lower acquisition costs
one-worker operation
space savings



The Forstner fully-automatic decoiling, straightening, slitting and cut to length line offers features that an industrial production manager has only dreamed about. This line fulfills the demanding requirements of any sheet metal working industry.



Two to maximum six powered, cantilever, hydraulically expandable decoilers provide all advantages for efficient loading by fork lift, crane or scissor coil car and decoil or recoil your coils smoothly.

The sheet metal guide-lanes facilitate feeding the sheet into the powered coil selector and prevent damage to the surface of the coils. The guideways are powered and guarantee the recoiling of your valuable material.

The coil change-over from one material to another is a fully automatic function of the coil selector and can easily be done by one operator. Changing from one coil width to the other is also an automatic process with the help of the powered edge-guide MFA.

Whenever a new coil is selected, the upper straightening shafts are automatically adjusted into a new position to ensure the required straightening quality. The coil-set is eliminated. Marks or lines from the upper straightening shafts can only be prevented by opening the upper straightening shafts during the standstill using the programmable straightener with sensitive material mode. We propose the programmable straightener when you are going to process sensitive material for high-quality and visible end products.

The heart of this line is the programmable slitter with automatic knife adjustment and scrap prevention. All assembled knives are automatically positioned in a short time and the upper knives are deactivated for cutting to length only or for scrap prevention.

Fast, burr less and precise cuts from the electric guillotine shear are achieved throughout the long life-time of this line.

The control makes the operation of the line a pleasure. The advanced control SPS-F2 version is outstanding not only for reliability, flexibility and precision but especially for ease of operation and unbeatable results. You can see easy understandable and logic symbols instead of text on the touch panel. An external programming can optionally be realized as well. More options for example remote control for decoilers and coil car, remote maintenance are often used by the industry.
The efficient production of blanks requires keeping a wide range of entirely different coils on hand. To allow rapid access to different sheets, we developed a multiple decoiling system featuring automatic sheet change-over in less than 1 minute.



Our objectives in developing this line were:



fully automatic sheet change-over in the shortest possible time
programmable upper straightening shafts adjustment
programmable setting of slitting knives
the simplest possible operating
retrofitting
lower acquisition costs
one-worker operation
space savings



The Forstner fully-automatic decoiling, straightening, slitting and cut to length line offers features that an industrial production manager has only dreamed about. This line fulfils the demanding requirements of any sheet metal working industry.



Two to up to max. six powered, cantilever, manually expandable decoilers provide all advantages for efficient loading by fork lift or crane and decoil or recoil your coils smoothly.

The sheet metal guide-lanes facilitate feeding the sheet into the powered coil selector and prevents damage to the surface of the coils. The guideways are not powered but guarantee the recoiling of your valuable material.

The coil change-over from one material to another is a fully automatic function of the coil selector and can easily be done by one operator. Changing from one coil width to the other is also an automatic process with the help of the powered edge-guide MFA.

Whenever a new coil is selected, the upper straightening shafts are automatically adjusted into a new position to ensure the required straightening quality. The coil-set is eliminated. Marks or lines from the upper straightening shafts can only be prevented by opening the upper straightening shafts during the standstill using the programmable straightener with sensitive material mode. We propose the programmable straightener when you are going to process sensitive material for high-quality and visible end products.

The heart of this line is the programmable slitter with automatic knife adjustment and scrap prevention. All assembled knives are automatically positioned in a short time and the upper knives are deactivated for cutting to length only or for scrap prevention.

Fast, burr less and precise cuts from the electric guillotine shear are achieved throughout the long life-time of this line.

The control makes the operation of the line a pleasure. The advanced control SPS-F2 version is outstanding not only for reliability, flexibility and precision but especially for ease of operation and unbeatable results. You can see easy understandable and logic symbols instead of text on the touch panel. An external programming can optionally be realized as well. More options for example remote control for decoilers and coil car, remote maintenance are often used by the industry.
The efficient production of blanks requires keeping a wide range of entirely different coils on hand. To allow rapid access to different sheets, we developed a multiple decoiling system featuring automatic sheet change-over in less than 1 minute.



Our objectives in developing this line were:



fully automatic sheet change-over in the shortest possible time
programmable upper straightening shafts adjustment
programmable setting of slitting knives
the simplest possible operating
retrofitting
lower acquisition costs
one-worker operation
space savings



The Forstner fully-automatic decoiling, straightening, slitting and cut to length line offers features that an industrial production manager has only dreamed about. This line fulfils the demanding requirements of any sheet metal working industry.



Two to maximum six powered, cantilever, hydraulically expandable decoilers provide all advantages for efficient loading by fork lift, crane or scissor coil car and decoil or recoil your coils smoothly.

The sheet metal guide-lanes facilitate feeding the sheet into the powered coil selector and prevents damage to the surface of the coils. The guideways are powered for infeeding and guarantee the recoiling of your valuable material.

The coil change-over from one material to another is a fully automatic function of the coil selector and can easily be done by one operator. Changing from one coil width to the other is also an automatic process with the help of the powered edge-guide MFA.

Whenever a new coil is selected, the upper straightening shafts are automatically adjusted into a new position to ensure the required straightening quality. The coil-set is eliminated. Marks or lines from the upper straightening shafts can only be prevented by opening the upper straightening shafts during the standstill using the programmable straightener with sensitive material mode. We propose the programmable straightener when you are going to process sensitive material for high-quality and visible end products.

The heart of this line is the programmable slitter with automatic knife adjustment and scrap prevention. All assembled knives are automatically positioned in a short time and the upper knives are deactivated for cutting to length only or for scrap prevention.

Fast, burr less and precise cuts from the electric guillotine shear are achieved throughout the long life-time of this line.

The control makes the operation of the line a pleasure. The advanced control SPS-F2 version is outstanding not only for reliability, flexibility and precision but especially for ease of operation and unbeatable results. You can see easy understandable and logic symbols instead of text on the touch panel. An external programming can optionally be realized as well. More options for example remote control for decoilers and coil car, remote maintenance are often used by the industry.
Die Vielzahl an Blechsorten erfordert ein rationelles Handling. Die Mehrfach-Abcoilanlage mit automatischem Blechwechsel mittels Mehrfachtisch ermöglicht einen Zugriff auf die meist verwendeten Bleche in weniger als 1 Minute.
The efficient production of blanks for profiles and flashings requires keeping a wide range of entirely different coils on hand. To allow rapid access to different coils, we developed a multiple decoiling system featuring automatic sheet changeover.



Forstner guarantees simplest loading of coils on cantilever or drop in decoilers, easy infeeding of various coils over guideways, automatic coil change-over of max. 9 different coils by the vertically adjustable coil selector MTV, optional plastic film sticking on sheets, manual or programmable straightening and accurate slitting and cutting to length of all type of materials in different widths and lengths directly from coil. You can expect straight blanks, free of burrs and free of marks.



The latest Forstner control ensures simplest and safest operation of the line. The operation of the line is a children’s game because of self-explanatory symbols on the full colour 9” touch panel. The standard software of the control offers numerous useful functions for example coil and machine management.