FORSTNER COIL PROCESSING > English > Lines > Multiple decoiling lines

The advantages of this system are many:

The decoiler is easy to load by inserting the core of the shaft in one bearing, precisely centered by the centering disk.
Decoiling is particularly easy due to the fine-adjustment brake shoes and to the deflectionroller stands, which help protect the surface of the sheet from damage.
The system takes up less floor space because the decoilers can be stacked.
The manual coil selector upstream of the cutting equipment allows rapid access to up to eight different sheets. Once all the sheets have been secured by the feed cylinders, a single operator can change from one to another in minimal time.

Our objectives in developing the manual coil selector were:

A multiple decoiling line with manual coil selector includes:

up to eight decoilers AG b1m
For companies involved in metal construction, we particularly recommend the AG 1000 b1m
with bearing on one side and brake.
the U-Bock deflection-roller stands UB
They protect the sheet as it exits the coil.
the manual coil selector SB
The SB can be used to change the sheet manually and can have up to six feeds.

sheet width:	up to 1250 mm
sheet thickness:	up to 1,00 mm mild steel with 5 pairs of blades
infeed power:	up to 5000 kgs weight of coil
accuracy:	± 0,5 mm / 2000 mm length, reproducible subject to similar conditions
speed:	up to 3+12 m/min. P312
weight of coil:	up to 5 x 1000 kgs

Slitting- and cut-to-length line with SEMI AUTOMATIC MULTIPLE DECOILING LINE

(shown on the picture)